Image Processing Steps And Related Sp Modes - Ricoh SP5 Series Service Manual

IMAGE PROCESSING

2.3.5 IMAGE PROCESSING STEPS AND RELATED SP MODES

The following tables shows the image processing path and the related SP modes
used for each image processing mode.
The user can adjust many of the image processing parameters with a UP mode
(Copy Features – General Features – Original Mode Quality Level), using fixed
settings such as Sharp, Normal, and Soft. Each of these fixed settings has different
parameter settings. The user's changes do not affect the SP mode settings.
If the user is not satisfied with any of the available settings for this UP mode, the
technician can adjust the SP modes. However, the SP mode settings are not used
unless the user selects 'SP Mode Changed' with the UP Mode.
Text
Text/Photo
Photo
Pale
Generation
For more details about the settings available for the user, see Service Tables –
Image Quality Setting by UP Mode.
Soft Normal
Photo Mode Normal
Screened Printed Normal
Soft Normal
Soft Normal
2-24
Sharp SP Mode Changed
Text Mode SP Mode Changed
Continuous Tone SP Mode Changed
Sharp
SP Mode Changed
Sharp SP Mode Changed
A229D650.WMF
June 30, 1998