Video Gateway/Recording Server - GeoVision GV-Video Server User Manual

4.3.7 Video Gateway/Recording Server

Note the function is only available on GV-VS04A, GV-VS04H (Firmware Version 1.03 or
later), GV-VS11 and GV-VS12 (Firmware Version 1.02 or later).
The GV-Recording Server is a video streaming server designed for large-scale video
surveillance deployments. It can receive and record up to 128 channels from various IP
video devices, and distribute up to 300 channels to its clients. With the GV-Recording
Server, the desired frame rate can be ensured while the CPU loading and bandwidth
usage of the IP video devices are significantly reduced.
To enable the GV-Video Gateway and GV-Recording Server connection:
1. Activate Link: Enable the connection to GV-Video Gateway / GV-Video Server.
2. Host Name or IP Address: Type the host name or IP address of GV-Video Gateway /
GV-Recording Server.
3. Port Number: Match the communication port on GV-Video Gateway / GV-Recording
Server. Or keep the default value 50000.
66
Figure 4-25