GeoVision GV-Video Server User Manual page 75

4. User Name: Type a valid user name to log into GV-Video Gateway / GV-Recording
Server.
5. Password: Type a valid password to log into GV-Video Gateway / GV-Recording
Server.
6. Enable schedule mode: Enable the GV-Video Gateway / GV-Recording Server
connection on the schedule you set in the Select Schedule Time section. Refer to 4.5
Recording Schedule for the same settings.
7. Click Apply. The Connection Status should display "Connected" and connected time.
8. To establish the connection to the second GV-Video Gateway / GV-Recording Server,
click the Connection 2 tab and repeat above steps for setup.
Note: The three functions, Cease motion detection messages from, Cease input
trigger message from and Cease video lost messages from, are not functional.
4 Administrator Mode
67