Chapter 3 Accessing The Gv-Video Server; Accessing Your Surveillance Images - GeoVision GV-VS02 User Manual

Chapter 3 Accessing the GV-Video Server

Two types of users are allowed to log in the GV-Video Server: Administrator and Guest.
The Administrator has unrestricted access to all system configurations, while the Guest
has the access to live images and network status only.

3.1 Accessing Your Surveillance Images

Once installed, your GV-Video Server is accessible on a network. Follow these steps to
access your surveillance images:
1. Start the Internet Explorer browser.
2. Enter the IP address or domain name of the GV-Video Server in the
Location/Address field of your browser.
3. Enter the login name and password.
•
The default login name and password for Administrator are admin.
•
The default login name and password for Guest are guest.
4. A video image, similar to the example in Figure 3-2, is now displayed in your browser.
Note: To enable the updating of images in Microsoft Internet Explorer, you must set your
browser to allow ActiveX Controls and perform a once-only installation of GeoVision's
ActiveX component onto your computer.
Figure 3-1
Accessing the GV-Video Server
3
13