GeoVision GV-Video Server User Manual page 15

1.7.1.2 GV-VS04H
No. Name
1 Video Input
2 Speaker Output
3 Audio Input
4 Reset
5 Default Button
Disk Full/Fault
6
LED
7 Ready LED
8 Power LED
Figure 1-6
Function
4 plugs for video inputs.
A plug for the speaker device.
Each plug is for 2 audio inputs.
It reboots the GV-Video Server, and keeps all current
configurations.
It resets all configurations to their factory settings. See 6.4
Restoring to Factory Default Settings.
This LED is on, indicating the hard drive is full or faulty.
This LED is on, indicating the GV-Video Server is ready for
connection.
This LED is on, indicating the power is supplied.
Introduction
1
7