Vsm - GeoVision GV-Video Server User Manual

4.3.4 VSM

After a motion or an I/O triggered event, the central monitoring station VSM can get
notified by text alerts. Up to two VSM servers can be connected simultaneously. For live
monitoring through VSM, you must already have a subscriber account on each VSM
server.
To enable the VSM connection:
1. Activate Link: Enable the monitoring through VSM.
2. Host Name or IP Address: Type the host name or IP address of VSM.
3. Port Number: Match the port to Port 2 on VSM. Or keep the default value 5609. For
details, see 8.1 Center V2.
4. User Name: Type a valid user name to log into VSM.
5. Password: Type a valid password to log into VSM.
6. Click Apply. The Connection Status should display "Connected" and connected time.
60
Figure 4-22