GeoVision GV-Video Server User Manual page 63

[Enable] Select to enable the e-mail function.
Sever URL/IP Address: Type the SMTP Server's URL address or IP address.
Server Port: Type the SMTP Server's port number. Or keep the default value 25.
From email address: Type the sender's e-mail address.
Send to: Type the e-mail address(s) you want to send alerts to.
Alerts Interval Time: Specify the interval between e-mail alerts. The interval can be
between 0 and 60 minutes. Any event trigger during the interval period will be ignored.
This option is useful for the events with high occurrence.
[Need authentication to login] If the SMTP Server needs authentication, select this
option and type the valid username and password.
[This server requires a secure connection] If the SMTP Servers needs a secure
connection (SSL), select this option.
[Alarm Settings] You can choose to automatically send e-mail alerts under these
conditions: video lost, tampering alarm, disk write error (Rec Error), hard disk full (HD full),
motion detection and triggered input.
For the alarm condition Motion Detection and Digital Input triggered, a still image from
the specified camera will be sent with the e-mail alert.
Note:
1. For GV-VS12, the This server requires a secure connection option is only
available on Firmware Version 1.02 or later.
2. The motion detection and triggered input options (under the Alarm Settings
section) are available for GV-VS04A (Firmware Version 1.03 or later), GV-VS04H
(Firmware Version 1.03 or later), GV-VS11 and GV-VS12 (Firmware Version 1.04 or
later).
For the related settings to send e-mail alerts, see 4.1.3 Motion Detection, 4.2.2
Input/Output Settings and 4.4 Monitoring.
Administrator Mode
4
55