GeoVision GV-Video Server User Manual page 99

To remove a USB mass storage device:
1. Click the Remove button.
2. When you are prompted to ensure the action, click Yes. The page will be refreshed
and the partition information will be cleaned.
3. Remove the device from the GV-Video Server.
Note:
1. If Enable Recycle is selected, the available space of the USB mass storage device
must be higher than the space you specified at the Stop recording or recycle disk
when free space of disk is smaller than x option. Otherwise no video will be
recoded.
2. The recording data may be lost if you remove the USB mass storage device during
recording.
3. If you do not remove the USB storage device properly, the data cannot be read in
another computer. In this case, re-plug the storage device back to the GV-Video
Server. The system will repair the data automatically. When the system is repairing
the data, the Remove field will display "Repairing".
Administrator Mode
4
91