GeoVision GV-Video Server User Manual page 126

B. Click Apply. The camera from the GV-Video Server is added to the list.
Note: If the GV-Video Server is not being detected, modify the HTTP port (Figure 7-3) and
streaming port (Figure 7-4 or Figure 7-5) to match those of the IP camera, and click the
Query button to detect the IP camera again.
4. Click the listed IP camera, and select Display position to map the IP camera to a
channel on the GV-System.
5. The Status column now should display "Connected". Click OK.
118
Figure 7-6