GeoVision GV-Video Server User Manual page 69

7. To establish the connection to the second VSM server, click the Connection 2 tab and
repeat above steps for setup.
These options you can also find on this VSM setting page:
Cease motion detection messages from: Stops notifying VSM of motion detection
from the selected camera.
Cease input trigger messages from: Stops notifying VSM of input trigger from the
selected input.
Cease video lost messages from: Stops notifying VSM of video lost from the
selected camera.
Enable schedule mode: Starts the monitoring through VSM based on the schedule
you set in the Select Schedule Time section. Refer to 4.5 Recording Schedule for the
same settings.
For related settings to activate the monitoring through VSM, see 4.1.3 Motion Detection,
4.2.2 Input/Output Settings, and 8.2 VSM.
4 Administrator Mode
61