GeoVision GV-Video Server User Manual page 71

To enable the GV-GIS connection:
1. Activate Link: Enable the monitoring through GV-GIS.
2. Host Name or IP Address: Type the host name or IP address of GV-GIS.
3. Port Number: Match the communication port on GV-GIS. Or keep the default value
3356.
4. User Name: Type a valid user name to log into GV-GIS.
5. Password: Type a valid password to log into GV-GIS.
6. Enable Schedule Mode: Enable the monitoring through GV-GIS based on the
schedule you set in the Select Schedule Time section. Refer to 4.5 Recording
Schedule for the same settings.
7. Click Apply. The Connection Status should display "Connected" and connected time.
8. To establish the connection to the second GV-GIS system, click the Connection 2 tab
and repeat above steps for settings.
For related settings to activate the monitoring through GV-GIS, see 4.1.3 Motion Detection,
and 4.2.2 Input/Output Setting.
Administrator Mode
4
63