GeoVision GV-Video Server User Manual page 79

[Start monitoring by Input X] Start monitoring by the assigned input. When the assigned
input is triggered, the system will respond based on your recording or input monitoring
settings in above Manual or Schedule options.
[Stop monitoring by Input X] Stop monitoring by the assigned input. When the assigned
input is triggered, the system will stop monitoring.
Remove HDD: When the monitoring is stopped by the input trigger, the storage device
will also be removed from the system.
ACC Signal: The option is designed for the use of GV-VR605A DC Voltage Regulator.
With the GV-VR605A, the GV-Video Server can be installed in the car. When the car
ignition is turned off, the GV-Video Server will remove the storage device from the
system and turn off automatically. For details, see GV-VR605A Installation Guide.
Note: The ACC Signal option is not functional in version 1.05.
[Camera Status Icon]
: Manual recording
: On standby
4
: Schedule recording
: Enabled for motion detection and input trigger
Administrator Mode
71