Input/Output Settings - GeoVision GV-Video Server User Manual

4.2.2 Input/Output Settings

The number of input and output devices the GV-Video Server can connect to vary from
model to model. The GV-VS04A and GV-VS04H can connect up to 4 input and 4 output
devices, GV-VS11 can connect 1 input and 1 output device, and GV-VS12 can connect up
to 2 input and 2 output devices.
Input Setting
Normal State: Set up the input state to trigger actions by selecting Open Circuit (N/O)
or Grounded Circuit (N/C).
Latch Mode: Enable the mode to have a momentary output alarm.
Trigger Digital Output Relay: Select the output(s) to be triggered once the input is
activated.
Record: Select the camera(s) to start recording once the input is activated.
Send Video to Center V2: Select the camera(s) to send their images to Center V2
when the input is triggered.
You can direct a PTZ camera to a preset point upon input trigger:
Set PTZ camera to preset point: Enable the preset function and select the camera
that represents the PTZ camera.
Input on: Direct the PTZ camera to a preset point when the input is triggered.
Figure 4-13
Administrator Mode
4
47