The Cgi Command - GeoVision GV-Video Server User Manual

F. The CGI Command
Note this function is supported by the GV-VS04A (Firmware Version 1.03 or later), GV-
VS04H (Firmware Version 1.03 or later), GV-VS11 and GV-VS12 (Firmware Version 1.04 or
later).
You can use the CGI command to obtain a snapshot of the live view or access the User
Account Web interface. For the GV-Video Server with the following details:
IP address: 192.168.2.11
Username: admin
Password: admin
Desired stream: 1
To obtain a snapshot of the live view, type the following into your web browser:
http://192.168.2.11/PictureCatch.cgi?username=admin&password=admin&channel=1
To access the User Account Web interface, type the following into your web browser:
http://192.168.2.11/ConfigPage.cgi?username=admin&password=admin&page=UserSetting
Note: For GV-VS11 and GV-VS12, if the resolution is set as 704 x 480 (704 x 576), the
obtained snapshot will be 704 x 240 (704 x 288).
170