Chapter 6 Advanced Applications
This chapter introduces more advanced applications.
6.1 Upgrading System Firmware
GeoVision will periodically release the updated firmware on the website. The new firmware
can be simply loaded into the GV-Video Server by using the Web interface or the IP
Device Utility included on the Software DVD.
Important Notes before You Start
Before you start updating the firmware, please read these important notes:
1. While the firmware is being updated,
A. the power supply must not be interrupted, and
B. do not unplug the Ethernet cable if the cable is the source of power supply
(Power over Ethernet or PoE supported).
2. Do not turn the power off in 10 minutes after the firmware is updated.
WARNING: The interruption of power supply during updating causes not only update
failures but also damages to your GV-Video Server. In this case, please contact your
sales representative and send your device back to GeoVision for repair.
104