Input/Output Settings - GeoVision GV-VS02 User Manual

4.2.2 Input/Output Settings

Input Setting
The number of input devices the GV-Video Server can connect to vary from model to
model. GV-VS02 and GV-VS02A connect up 4 input devices; GV-VS12 connects 2 input
devices.
Normal State: Set up the input state to trigger actions by selecting Open Circuit (N/O)
or Grounded Circuit (N/C).
Latch Mode: Enable the mode to have a momentary output alarm.
Trigger Digital Output Relay: Select the output(s) to be triggered once the input is
activated.
Record: Select the camera(s) to start recording once the input is activated.
Send Video to Center V2: Select the camera(s) to send their images to Center V2
when the input is triggered.
You can direct a PTZ camera to a preset point upon input trigger:
Set PTZ camera to preset point: Enable the preset function and select the camera
that represents the PTZ camera.
Input on: Direct the PTZ camera to a preset point when the input is triggered.
Input off: Direct the PTZ camera to another preset point when the triggered input is
off.
40
Figure 4-10