The Cgi Command; Default Port Value - GeoVision GV-VS04H User Manual

F. The CGI Command
Note this function is only supported by GV-VS04H (Firmware Version 1.03 or later), GV-
VS11 / 12 (Firmware Version 1.04 or later) and GV-VS14 / 2420 / 2400 / 2401 / 2820 / 2800 /
21600.
You can use the CGI command to obtain a snapshot of the live view or access the User
Account Web interface. For GV-Video Server, refer to the following details:
IP address: 192.168.2.11
Username: admin
Password: admin
Desired stream: 1
To obtain a snapshot of the live view, type the following into your Web browser:
http://192.168.2.11/PictureCatch.cgi?username=admin&password=admin&channel=1
To access the User Account Web interface, type the following into your Web browser:
http://192.168.2.11/ConfigPage.cgi?username=admin&password=admin&page=UserSetting
Note: For GV-VS11 / 12, if the resolution is set as 704 x 480 (704 x 576), the obtained
snapshot will be 704 x 240 (704 x 288).
G. Default Port Value
HTTP Port
Streaming Port
E-Mail Server
FTP Server
Center V2
Vital Sign Monitor
GV-GIS
Video Gateway
Backup Center
ViewLog Server
RTSP/TCP Port
RTP/UDP Port
80
10000
25
21
5551
5609
3356
50000
30000
5552
8554
17300 -17319
Appendix
171