MAINTENANCE ON CHASSIS AND ENGINE
Checking the play in the throttle cable
9.18
Guideline
Screw, handlebar clamp
Info
Make sure cables and wiring are positioned correctly.
–
Position the instrument support on the handlebar.
–
Move the handlebar to the straight-ahead position. Move the throttle lever back and
forth slightly to ascertain the play in the throttle cable
Guideline
Play in throttle cable
»
If the throttle cable play does not meet specifications:
–
Adjust the play in the throttle cable. (
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
301795-11
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and let it run idle. Move the handlebar to and fro over the entire steer-
ing range.
The idle speed must not change.
M8
20 Nm
(14.8 lbf ft)
.
3... 5 mm (0.12... 0.2 in)
p. 97)
96