Checking/Adjusting The Camber - KTM 525 XC Owner's Manual

MAINTENANCE WORK ON THE CHASSIS
Info
The toe is the difference in length between distances
ing straight ahead. The distance is measured at the height of the wheel center from rim flange to rim flange.
–
Tighten nuts and .
2 3
Guideline
Lock nut, tie rod, outside
Lock nut, tie rod, inside
Info
The tie rods must still be freely movable.
1

Checking/adjusting the camber

10.22
Info
The left and right camber should have the same settings.
The operations are the same on the left and right.
D
x
–
Raise the vehicle with the lifting gear. (
and by which the wheels are spaced at the front or rear when driv-
C
M12x1.25
M12LHx1.25
p. 69)
20 Nm (14.8 lbf ft)
20 Nm (14.8 lbf ft)
91