Checking/Adjusting The Camber - KTM 525 XC ATV EU Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE
Info
The toe is the difference in length between distances
ing straight ahead. The distance is measured at the height of the wheel center from rim flange to rim flange.
–
Tighten nuts and .
 
Guideline
Lock nut, tie rod, outside
Lock nut, tie rod, inside
Info
The tie rods must still be freely movable.


Checking/adjusting the camber

9.15
Info
The left and right camber should have the same settings.
The operations are the same on the left and right.

x
–
Jack up the vehicle. (
and by which the wheels are spaced at the front or rear when driv-

M12x1.25
M12LHx1.25
p. 72)
20 Nm (14.8 lbf ft)
20 Nm (14.8 lbf ft)
90