TUNING THE CHASSIS
Front shock absorber - adjusting the spring preload
9.8
Warning
Danger of accidents Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
–
Extreme modifications to the adjustment of the spring elements can cause a serious deterioration in the handling characteris-
tics and overload some components.
–
Only make adjustments within the recommended range.
–
After making adjustments, ride slowly at first to get the feel of the new ride behavior.
Caution
Danger of accidents Disassembly of pressurized parts can lead to injury.
–
The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be glad to help.)
–
Measure the cross over setting
ring
.
3
Guideline
Cross over
–
Tighten the spring by turning adjusting rings
Info
The sliding bushing is made of plastic. Therefore, do not lock it too tightly to
avoid damaging the thread.
601091-01
The left and right shock absorbers should have the same settings.
–
Lock the adjusting rings.
–
Remove the vehicle from the lifting gear. (
between sliding bushing
B
2
19 mm (0.75 in)
to measurement
1
p. 69)
62
and the collar of adjusting
.
B