MAINTENANCE ON CHASSIS AND ENGINE
Front shock absorber - adjusting the spring preload
9.9
Danger
Danger of accidents The shock absorber is under high pressure.
–
The shock absorber is filled with highly compressed nitrogen, so never dismantle the shock absorber or carry out any mainte-
nance on it yourself.
Warning
Danger of accidents Do not make any radical changes to the adjustment of the shock absorbers.
–
Make adjustments in small steps only.
Info
Increasing the spring preload raises the center of gravity of the vehicle. This can have a large impact on vehicle handling.
Tip
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of the spring.
–
Tighten the spring by turning adjusting ring
Info
The left and right shock absorbers should have the same settings.
–
Tighten the adjusting ring.
–
Remove the vehicle from the work stand. (
–
Jack up the vehicle. (
p. 64)
–
Clean the shock absorber thoroughly.
to setting
.
p. 64)
71