Table of Contents
Advertisement
WORK
Installing the rear fender
3.4
Setting kilometers or miles
3.5
Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.
–
Raise the rear of the air filter box lid
press on the carburetor connection boot to kink it at that location. This prevents the
carburetor connection boot from disconnecting from the carburetor.
–
Raise fender
601080-10
–
Raise the rear of air filter box lid
on the carburetor connection boot to kink it at that location. This prevents the car-
buretor connection boot from disconnecting from the carburetor.
–
Position front fender
–
Fix the air filter box lid in the fender.
Info
If the air filter box lid is not correctly mounted, dust and dirt can penetrate
into the engine and cause damage.
601081-10
–
Mount and tighten screws
Guideline
Remaining screws, chassis
–
Mount the seat. (
601079-10
Condition
The vehicle is stationary.
–
Press the button
display.
–
Press the button
The Setup menu opens and the active functions are displayed.
–
Press the button
Km/h adjusting
–
Press the button
400329-01
. At the same time, use your other hand to
at the rear and remove it.
. At the same time, use your other hand to press
.
.
p. 5)
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
repeatedly until the Km/h/Mph display flashes.
.
M6
10 Nm (7.4 lbf ft)
6
Hide quick links:
Advertisement
Table of Contents
