BRAKES
Info
Never use DOT 5 brake fluid! It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5 brake
fluid.
Avoid contact between brake fluid and painted parts. Brake fluid is corrosive!
Use only clean brake fluid from a sealed container.
Removing rear brake linings
11.16
Warning
Danger of accident Brake system failure.
–
Maintenance work and repairs must be carried out professionally. (Your authorized KTM workshop will be glad to help.)
–
Remove the rear brake linings.
–
Remove screw cap
–
Press the brake piston back to its basic position and make sure that no brake fluid over-
flows from the brake fluid reservoir.
–
Mount the rear brake linings.
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Mount the screw cap with the membrane and tighten.
302832-10
Info
Clean up overflowed or spilt brake fluid immediately with water.
x
x
(
p. 142)
with membrane
.
x
(
p. 144)
.
p. 207)
142