Checking The Front Brake Discs - APRILIA RSV 1000 R FACTORY Workshop Manual

CYCLE PARTS
5.8.3.

CHECKING THE FRONT BRAKE DISCS

Brake discs:
NOTE These operations must be performed with the brakes
discs installed on the wheel; they refer to a single disc,
though they are applicable to both.
•
Check the wear on the brake disc. Using a micrometer,
measure the minimum thickness in several places.
If the minimum thickness is below the minimum value,
even in a single point, change the disc.
Brake disc min. thickness: 2.95 in (4 mm).
•
Using a comparator, make sure that the disc's maxi-
mum wobbling does not exceed the limit value, other-
wise change it.
Brake disc max. wobbling: 0.22 in (0.3 mm)
5 - 126
RSV 1000 R - RSV 1000 R FACTORY