CYCLE PARTS
5.2.12.
REPLACING THE OIL/DUST SEAL (RSV FACT)
REMOVAL
NOTE Make sure to have the special tools B (no. 8140149),
C (no. 8140189), and D (no. 8140146) ready at hand before
proceeding.
•
Perform the first nine steps of the procedure described
at paragraph (FRONT FORK OIL CHANGE).
•
Place the fork leg in a vice. Position the two shells of
the special tool (B) to the vice to avoid damage.
•
Separate the slider (2) from the stanchion tube (1).
•
Pry the dust seal (3) off the slider (2) levering with a
flat-blade screwdriver at various positions.
•
Use the flat-blade screwdriver to remove the retaining
ring (4).
5 - 60
RSV 1000 R - RSV 1000 R FACTORY