APRILIA RSV 1000 R FACTORY Workshop Manual page 243

CYCLE PARTS
FRONT WHEEL RIM
•
Using a comparator, make sure that the radial (A) and
axial (B) eccentricity of the rim (2) do not exceed the
limit value.
Excessive eccentricity is usually caused by worn or
damaged bearings.
If, after changing the bearings, the value does not fall
within the indicated limit, change the rim (2).
Maximum radial and axial eccentricity: 0.079 in (2
mm).
5 - 98
RSV 1000 R - RSV 1000 R FACTORY