APRILIA RSV 1000 R FACTORY Workshop Manual page 197

CYCLE PARTS
- pumping element.
If excessive wear or any damage is noticed, change the
component in question.
CAUTION
Remove any accumulation of impurities from
the bushings, taking care not to scratch their
surfaces.
Replace the following components with new ones:
- gasket;
- anti dust gasket;
- the two O rings on the adjusting element.
Oil quantity: 204.7 ± 0.98 in (520 ± 2.5 cm).
Oil level: 4.646 ± 0.079 in (118 ± 2 mm) (from the slider
edge).
NOTE In order to obtain a correct measurement of the oil
level, the slider must be perfectly vertical. The oil level must
be the same for both tubes.
5 - 52
RSV 1000 R - RSV 1000 R FACTORY