CYCLE PARTS
IMPORTANT Make sure to use the special tool (OPT):
-
Aprilia part# 8140191 (swinging arm spindle / engine
stand tool).
•
Use the provided socket wrench to tighten the lock nut
(1).
•
Tighten the nut (4).
•
Remove the tape holding the chain in place.
•
Refit the chain to the pinion.
IMPORTANT When refitting, apply LOCTITE
the inner pinion toothing.
•
Fit the pinion with chain mounted to the shaft.
IMPORTANT Apply LOCTITE
•
Fit the washer onto the screw.
•
Tighten down the screw.
5 - 90
®
Anti-Seize to
®
243 to the screw thread.
RSV 1000 R - RSV 1000 R FACTORY