APRILIA RSV 1000 R FACTORY Workshop Manual page 303

RSV 1000 R - RSV 1000 R FACTORY
STARTING
Before it starts the engine, the ECU waits for permission
from the dashboard over the CAN which identifies the engine
model V990 (this information resides in the dashboard).
No sensor (apart from the fuel reserve sensor) is connected
directly to the dashboard; the dashboard reads from the
ECU. All sensors/switches are connected to the ECU.
DASHBOARD INDICATOR ACTIVATION :
Indicator LED
Neutral SMD
green
Side stand SMD am-
ber
EFI SMD red
Oil pressure
CAN-BUS LINE SIGNALS :
Transmitted signal
Engine speed
Speed
Diagnostics
Neutral (indicator)
Stand (indicator)
Oil pressure (indicator)
Water temperature
Signal sent
Odometer (stored in injec-
tion controller memory for
future applications)
Model ID
If data is not received (CAN line damaged/disconnected), the
red line, warning and stand indicators come on, the neutral
indicator stays off, revolution counter and speedometer stay
at zero, battery voltage reads 9.0V and the water tempera-
ture reading flashes ERR.
Activation
ECU via CAN
Frequency (Hz)
50
Frequency (Hz)
50
ELECTRICAL SYSTEM
7 - 15