APRILIA RSV 1000 R FACTORY Workshop Manual page 288

RSV 1000 R - RSV 1000 R FACTORY
• Tighten down the filler cap and the expansion reservoir
cap.
• If fluid does not issue from the radiator bleed screw,
before the circuit is completely filled (around 2 liters),
use the expansion reservoir level as a reference.
• Run the engine for about 30 seconds with the filler cap
open.
•
Switch off the engine and pour coolant into the filler
cap.
•
Complete filling the circuit up to the upper rim of the
filler cap.
•
Run the engine up to its normal running temperature
(the fans must cut in at least twice); switch it off and
wait for it to cool down (around 12 hours).
•
Check that the coolant level is still between the MIN
and MAX marks.
COOLING SYSTEM
6 - 5