CYCLE PARTS
REAR WHEEL PIN
•
Using a comparator, check the eccentricity of the pin
wheel (1). If the eccentricity exceeds the limit value,
change the pin wheel (1).
Maximum eccentricity: 0.0098 in (0.25 mm).
REAR WHEEL RIM
•
Using a comparator, make sure that the radial (A) and
axial (B) eccentricity of the rim (2) do not exceed the
limit value.
Excessive eccentricity is usually caused by worn or
damaged bearings.
If, after changing the bearings, the value does not fall
within the indicated limit, change the rim (2).
Maximum radial and axial eccentricity: 0.079 in (2
mm).
5 - 110
RSV 1000 R - RSV 1000 R FACTORY