KYMCO People Service Manual page 75

5. ENGINE REMOVAL/INSTALLATION
Disconnect the engine oil pressure switch
wire.
Loosen the water hose bands to disconnect
water hoses from the water ducts.
Disconnect the secondary air tube from the
secondary air inlet tube.
Disconnect the breather hose (air cleaner)
from cylinder head cover.
Disconnect the spark plug cap from cylinder
head.
Remove the screw attaching rear fender C.
Remove the three bolts on the air cleaner.
Remove the air cleaner and disconnect
breather hose from transmission case cover.
Remove the right/left rear shock absorber
upper mount bolts.
Remove the left rear shock absorber lower
mount bolts.
5-3
PEOPLE/PEOPLE S 250
Engine Oil Pressure
Water Hoses
Switch Wire
Water Hose Bands
Breather Hose (Cylinder
Head Cover)
Bolts
Rear Shock Absorber
Upper Mount Bolts
Breather Hose
Water Ducts
Secondary Air Tube
Spark Plug Cap
Lower Mount Bolts