KYMCO People Service Manual page 158

12. COOLING SYSTEM
THERMOSTAT INSPECTION
Suspend the thermostat in a pan of water
over a burner and gradually raise the water
temperature to check its operation.
Technical Data
Begins to open
Full-open
Valve lift
x Do not let the thermostat touch the pan
as it will give a false reading.
x Replace the thermostat if the valve
stays open at room temperature.
xTest the thermostat after it is opened for
about 5 minutes and holds the
temperature at 70 .
THERMOSTAT INSTALLATION
The installation sequence is the reverse of
removal.
Replace the O-ring with a new one and
apply grease to it.
Fill the cooling system with the specified
coolant. ( Ö 3-9)
80r2
90
3.5 4.5mm
PEOPLE/PEOPLE S 250
Thermostat
Thermometer
O-ring
Thermosensor
12-16