10. A.C. GENERATOR/STARTER CLUTCH
INSTALLATION
Install oil pump and tighten the two bolts.
Make sure that the pump shaft rotates
freely.
The arrow of oil pump is upside.
Install cam chain.
Install the pump drive chain and driven gear,
then set the circlip securely on the pump
shaft.
Install the oil separator cover properly.
Fit the tab of the separator cover into the
slit in the separator.
10-7
PEOPLE/PEOPLE S 250
Arrow Mark
Bolts
Pump Driven Gear
Pump Drive Chain
Oil Pump
Cam Chain
Circlip
Oil Separator Cover
Bolts