KYMCO People Service Manual page 51

2. EXHAUST MUFFLER/FRAME COVERS
LEG SHIELD COVER REMOVE
Remove the ignition switch decoration ring.
Remove the bolt on the leg shield cover.
Remove the two screws on the back of under
position.
Disconnect the leg shield cover.
The installation sequence is the reverse of
removal.
COWL UNDER REMOVE
Remove the front cover.
Remove the four screws attaching the leg
shield low.
Disconnect the leg shield low with the cowl
under cover.
The installation sequence is the reverse of
removal.
FLOOR-FOOT REMOVE
Remove the met-in box.
Remove the body cover.
Remove the front cover.
Remove the leg shield cover and cowl under
cover.
Remove the four bolts attaching the floor-foot.
The installation sequence is the reverse of
remove.
WINDSHIELD REMOVAL
Remove the three bolts attaching the front
windshield out cover.
Remove the windshield out cover.
Remove the windshield.
2-15
PEOPLE/PEOPLE S 250
Bolt
Decoration Ring
Screws
Screws
Blots
Windshield