KYMCO People Service Manual page 172

13. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK
CARBURETOR BODY CLEANING
Blow compressed air through all passages of
the carburetor body.
x Make sure that no fuel jet is clogged.
Install the O-ring onto the air-cut-off valve
body securely.
x Install the O-ring with the flat face
toward the valve body side.
Install the diaphragm, spring, and cover.
Install and tighten the two screws attaching
the air cut-off valve cover.
Connect the hose.
13-13
PEOPLE/PEOPLE S 250
O-ring
Diaphragm
Cover Spring
Screws