KYMCO People Service Manual page 49

2. EXHAUST MUFFLER/FRAME COVERS
SIDE COVER REMOVAL
Remove the screws attaching the right and
left side covers.
Remove the right and left side covers by
pulling them outward.
Disconnect the tow screws attaching the
center cover.
Remove the center cover.
FRONT COVER REMOVE
Remove the screws attaching the right and
left side covers air outlet.
Disconnect the right and left side cover air
outlet.
Remove the two screws on the both sides of
front cover.
Remove the two screws on the back of front
cover.
Remove the two screws on the skirt of front
cover.
Remove the bolt and two adjusting screws on
the front of front cover.
Disconnect the signal light wire connector.
Remove the front cover.
The installation sequence is the reverse of
remove.
2-13
PEOPLE/PEOPLE S 250
Side Cover
Screws
Center
Screws
Side Cover Air Outlet
Screws Front Cover
Screw
Screws
Bolt