KYMCO People Service Manual page 195

14. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
Install the brake caliper to the shock absorber
and tighten the two bolts.
Torque: 29 35N-m
Connect the brake fluid tube with the
attaching bolt and two sealing washers to the
brake caliper and tighten the fluid tube bolt.
Torque: 24 30N-m
Fill the brake reservoir with the specified
brake fluid and bleed air from the brake
system. ( Ö 14-10)
When installing the brake fluid tube, be
sure to install the two sealing washers.
14-13
PEOPLE/PEOPLE S 250
Brake Fluid Tube
Washers
Bolts