8. DRIVE AND DRIVEN PULLEYS/
V-BELT
LEFT CRANKCASE COVER
REMOVAL
Remove the met-in box and carrier. ( Ö2-6 )
Remove the body cover, center cover and
rear fender A together. ( Ö2-6 )
Disconnect the belt air tube from the frame
Remove the left crankcase cover bolts and
left crankcase covers.
Remove the seal rubber and dowel pins.
INSTALLATION
Install the dowel pins and the seal rubber.
Install the left crankcase cover.
Install and tighten the left crankcase cover
bolts.
8-3
PEOPLE/PEOPLE S 250
Air Tube
Left Crankcase
Left Crankcase Cover
Dowel Pins
Seal Rubber
Left Crankcase Cover
Bolts
Bolts