KYMCO People Service Manual page 152

12. COOLING SYSTEM
Inspect the mechanical (water) seal and
seal washer for wear or damage.
The mechanical seal and seal washer
must be replace as a set.
WATER PUMP SHAFT REMOVAL
Disconnect the water hose from the right
crankcase cover.
Remove the eight bolts attaching the right
crankcase cover.
Remove the water pump bearing snap ring
from the water pump assembly.
Remove the water pump shaft and inner
bearing.
Impeller
Seal Washer (Porcelain)
Bolts
Water Pump Assembly
Water Pump Assembly
Snap Ring
Water Pump Shaft
PEOPLE/PEOPLE S 250
Mechanical Seal
Inner Bearing
12-10