13. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK
CARBURETOR REMOVAL
Remove the met-in box.
Disconnect the fuel tube at the carburetor.
Disconnect the auto bystarter wire.
Disconnect the throttle position sensor wire.
Disconnect the heater carburetion wire
coupler
Loosen the throttle cable adjusting nut and
lock nut, and disconnect the throttle cable
from the carburetor.
Loosen the air cleaner connecting tube band
and carburetor intake manifold band and then
remove the carburetor.
VACUUM CHAMBER DISASSEMBLY
Loosen the drain screw and drain the fuel
from the float chamber.
13-7
PEOPLE/PEOPLE S 250
Auto Bystarter
T.P.S
T.P.S Wire
Air Cleaner Connecting
Tube Band
Throttle Cable
Drain Screw
Fuel Tube
Auto Bystarter Wire
Intake Manifold Band
Heater Carburetion
Wire Coupler