KYMCO People Service Manual page 206

15. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER
REAR WHEEL
REMOVAL
Remove the exhaust muffler. ( Ö 2-10)
Remove the rear brake caliper. ( Ö 15-3)
Remove the rear fork. ( Ö 15-6)
Remove the rear axle collar.
Remove the rear wheel.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
INSTALLATION
The installation sequence is the reverse of
removal.
Torque:
Rear shock absorber lower mount bolt:
35 45N-m
Rear axle nut: 110 130N-m
REAR SHOCK ABSORBER
REMOVAL
Remove the met-in box and carrier. ( Ö 2-6)
Remove the body cover, center cover and
rear fender A together. ( Ö 2-6)
Remove the right/left rear shock absorber
upper and lower mount bolts.
Remove the right and left rear shock
absorbers.
15-7
PEOPLE/PEOPLE S 250
Rear Brake Disk
Upper Mount Bolts
Lower Mount Bolts
Rear Axle Collar