KYMCO People Service Manual page 207

15. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER
INSTALLATION
Install the rear shock absorbers in the reverse
order of removal.
Torque:
Upper Mount Bolt: 35 45N-m
Lower Mount Bolt: 35 45N-m
ADJUSTABLE REAR CUSHION
To suit scooter behaviour to load condition
rear cushion could be adjusted in spring
preload.
It is possible to adjust rear cushion in three
positions:
A position "soft"
B position "medium"
C position "hard"
When you adjust rear cushion, the spring
preload of rear cushions must be the same.
A cushion adjust wrench is provided with
PEOPLE 250.
The rear right cushion can be adjusted
directly with the wrench.
Remove the four bolts from air cleaner before
rear left cushion to be adjusted.
PEOPLE/PEOPLE S 250
B
A
C
Wrench
Bolts
15-8