Service Information - KYMCO People Service Manual

13. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK

SERVICE INFORMATION

GENERAL INSTRUCTIONS
x When working with gasoline, keep away from sparks and flames.
x Note the locations of O-rings when disassembling and replace them with new ones during
assembly.
x Before float chamber disassembly, drain the residual gasoline from the float chamber.
x Do not try to disassemble the auto bystarter.
x When assembling the vacuum chamber and air cut-off valve, be careful not to damage the
diaphragms.
x All cables, fuel lines and wires must be routed and secured at correct locations.
x When removing the fuel tank, keep sparks and flames away from the working area.
x When removing the fuel tank, the remaining fuel in the tank must be lower than ½ of the fuel tank
capacity to avoid gasoline overflowing.
x Fuel tank capacity: 8.0 liters
SPECIFICATIONS
Type
Size of bore (mm)
Main jet NO
Pilot screw opening
Piston diameter (mm)
Idle speed
Throttle type
Fuel pump output
SPECIAL TOOLS
Float level gauge
Fuel unit remover
13-5
PEOPLE 250
CVK
30
108#
2½ ± ½
28.8
1700
Butterfly type
33cc/1800rpm/10 Seconds
PEOPLE/PEOPLE S 250
PEOPLE S 250
CVK
30
104#
1¼± ¾
26
1600
Butterfly type
33cc/1800rpm/10 Seconds