Drive Pulley; Clutch Outer/Driven Pulley/V-Belt - KYMCO People Service Manual

8. DRIVE AND DRIVEN PULLEYS/
V-BELT
Connect the drive belt air tube to frame.

DRIVE PULLEY

DRIVE PULLEY FACE REMOVAL
Remove the left crankcase cover. ( Ö8-3 )
Hold the drive pulley using a universal holder
and remove the drive face nut and washer.
Remove the drive pulley face.
Special
Universal HolderE017

CLUTCH OUTER/DRIVEN PULLEY/V-BELT

REMOVAL
Remove the left crankcase cover. ( Ö 8-3)
Remove the drive pulley face. ( Ö 8-4)
Hold the clutch outer with the universal holder
and remove the clutch outer nut and washer.
Special
Universal HolderE017
Remove the clutch outer, driven pulley and
belt together.
Remove the drive belt from the movable drive
face.
INSPECTION
Check the drive belt for cracks, separation or
abnormal or excessive wear.
Measure the drive belt width.
Service Limit: 22.0mm replace if below
x Use specified genuine parts for
replacement.
PEOPLE/PEOPLE S 250
Air Tube
Drive Pulley Face
Drive Belt
Universal Holder
Movable Drive Face
8-4