Power Management; How To Switch To 'Sleep' Or 'Wake' Mode - Neopost IS-240 User Manual

2.4

Power Management

Energy Star® Compliance
Your Mailing System is an Energy Star® qualified mailing system that automatically goes
into a low-power 'Sleep mode ' after a period of inactivity.
The mailing system automatically switches to 'Sleep mode' after 5 minutes of non-activity.
You can change this default setting as supervisor. You can also switch to a low-power
mode manually.
A very-low-power sleep mode called "Soft off mode " is also available. This mode should
only be used for long periods of non-use of the machine. In this mode, the machine takes
longer to wake up and the automatic postal updates cannot take place.
See also
• To change the low-power modes time-outs, see:
(User) on page 134 .

How to Switch to 'Sleep' or 'Wake' Mode

1.
Press to switch between 'Sleep' and 'Wake' modes.
- A short press on the Sleep/On/Soft off mode button sets the machine to 'Sleep'
mode.
- A long press on the Sleep/On/Soft off mode button sets the machine to 'Soft off '.
The light located next to the key indicates:
- Green : The Mailing System is in Awake mode and ready for use.
- Amber (continuous) : The Mailing System is in Sleep mode (Low-power mode).
- Amber (blinking) : The Mailing System is in Soft off mode (Very-low-power
mode).
To avoid weighing errors, make sure the Weighing Platform is
clear when waking up the machine. If the machine does not seem
to display a correct weight, see
How to Change the 'Sleep timeout'
Weighing Problems
2
on page 195 .
21