5.2
Setting up 'Machine PIN Code'
You can set a 'Machine PIN code' to open a session on your franking machine by activating
the 'Access control ' mode.
How to activate 'Access control' and set the 'Machine PIN
code'
As supervisor (See
1.
Either:
Press
Or
Select the path:
The Access control screen is displayed.
2.
Select ON with up and down arrows
A screen to set the 'Machine PIN code' appears
3.
Enter the PIN code and press [OK].
This functionnality is only applicable to machines where Accounting
is not allowed (number of accounts = 0).
To check your number of accounts or upgrade your machine, see
Account Level (Optional)
How to Log in as Supervisor
and type 3.2.2
Default user settings
on page 112
on page 128)
System settings
Access control
73
5