System Timeouts; How To Change The 'Sleep Timeout' (User) - Neopost IS-240 User Manual

9.5
As User or Supervisor , you can change the following system time-outs:
• 'Sleep timeout' : Period of inactivity after which the machine automatically turns to
'Sleep mode'.
• 'Soft off timeout' : Period of inactivity after which the machine automatically turns
to 'Soft off mode'.
These modes are described in section

How to Change the 'Sleep timeout' (User)

To change the "Sleep time-out" logged as User:
1. Either:
Press
9
Or
Select the path:
The Sleep timeout screen is displayed.
2. Enter the new value of the 'sleep timeout'.
3. Press [OK] to validate.
The Time out settings screen is displayed.
134

System Timeouts

and type 2.3.1
Batch settings
Power Management
Time out settings
on page 21 .
Sleep timeout