Neopost IS-240 User Manual page 45

In Standard weighing mode
the [Standard ] Home Screen:
1. Put the mail piece on the WP.
The weight of the mail piece is displayed in the Weight area of the home screen and
the postage amount is updated.
2. Withdraw the envelope from the WP and insert it into the system, with the side to be
printed facing upwards.
The Mailing System applies the imprint on the mail piece.
, you can print postage directly on mail pieces from
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications on page 203 ), you may print on a label instead.
When you put a mail piece on the Weighing Platform, the weight
value is saved when you remove it.
You can then print a batch of similar mail pieces (same weight)
without weighing them each. To print a batch of mixed mail pieces
(different weight), you need to weigh each mail piece before printing.
3
39